Call Reception - Castel MAYLIS MP Mode D'emploi

MP
USE
Call to other extension
a
The call (pressing one of the buttons F1 to F11) triggers the transmission of a ringing train to the extension(s)
concerned. (Depending on the programming, one to three extensions are called). Pressing a button again will delete
the current call.
The operator can also call another extension using the phone book, or by dialing a number directly using the keypad.
Establishment of the communication
One of the called stations has the possibility to establish the call at any time by selecting the calling station with a press
of the P/E key. The call takes place in half duplex hands-free mode. The operator can force the call by pressing the P/E
key.
Power
Phone and ringing power can be adjusted with the keys
Ringing
The volume of the ringer can be adjusted while the ringer is ringing in technical mode. If the telephone is idle, pressing
" " activates the ringing and allows the volume to be adjusted with the keys

Call reception

When an extension receives a call, the number of the calling extension appears on the bottom line of the display
alternately with its name. The operator selects the calling station by pressing the "P/E" key.
When an extension receives several calls at the same time, they are priority. The operator can scroll through the calling
extensions with the "
Technical data sheet n° 600-0091E
" key and select an extension by pressing the P/E key.
.
www.castel.fr
.
FR
EN
Page 10 / 12