Heston Blumenthal Everdure HBG2GUS Instructions De Montage page 17

STEP 10
/Place the grills onto the barbeque as shown in the diagrams. Each grill should have a
5-6mm gap around each edge. Each grill will allocate in a groove on a plate support.
Assembly, Operation & Maintenance Instructions
STEP 11
/Take the match holder (09) and fix into place using a M6.12in (12mm) screw (K), nut M6
(H),
spring washer (D) and flat washer (E). Hook the match holder onto the screw (K). The
stand is now complete.
/Connect an approved hose and/or regulator to the inlet manifold (if not already
connected). Put the gas cylinder onto the bottom shelf support R (07) and fix in place
by cylinder belt (I). Tighten it by adjusting the cylinder belt (I). Connect regulator to the
gas cylinder/bottle and leak test (as per the gas connections instructions). Check all hose
connections are tight, and that ll control knobs are off before turning on the gas supply
and leak testing.
17