Publicité
Les langues disponibles
Les langues disponibles
Operation
Warning symbols
1. Check the correct load capacity
and load distribution of vehicles.
2. Do not override the self-closing
lifts control
3. Keep feet clear of lift while
lowering.
4. Keep free the area by lifting or
lowering of the vehicles.
5. Clear area if vehicle is in danger
of falling.
6. Avoid excessive raking of the
vehicle while on the lift.
7. The lift have to be used by
trained operator only.
8. Use vehicle manufacturer's
lifting points and close the doors
before lifting of the vehicle
9. Allow no unauthorized persons
in the working area.
10. Use height extenders when
necessary to ensure a good
contact.
11. Always use safety stands when
removing or installing heavy
components.
12. Auxiliary adapters may reduce
load capacity.
13. Proper maintenance and
inspection is necessary for safe
operation.
14. Read operating and safety
manuals before using the lift
15. Do no operate with a damaged
lift
16. On the lift, lifting arms inside of
the lifted vehicles any objects or
people have not to be carried.
17. Before lowering the lift check
that there are not obstructions
under the vehicle or the lifting
arms.
18. Lift must not be cleaned under
running water
This product is designed for lifting vehicles. The relevant technical specifications of the lift have to be
considered.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2022-02
Manufacturer ATH-Heinl GmbH & CO.KG
- 7 -
Publicité
