English - AEG AquaSense Serie Mode D'emploi

Introduction to AquaSense™ and
PUREADVANTAGE™
1. Top Cover Large Jug
2. Top Cover Small Jug
3. Filter
4. Container Unfiltered water
5. Life Time Indicator
6. Large Jug
7. Small Jug
Thank you for choosing AquaSense™ with
PUREADVANTAGE™ filter technology
How to use and store
To ensure high quality, excellent filtration performance
and great tasting water please follow the instructions .
1. How to get started
• Remove Life Time Indicator before cleaning the
jug.
• Clean all parts of the jug in the dishwasher or by
hand.
• After cleaning put back the Life Time Indicator and
activate it:
The Life Time Indicator reminds you when it is time to
change the PUREADVANTAGE™ filter. Each dot refers
to a lifetime of about one week. The recommended
lifetime of four weeks (30 days) equals four dots
(100%). After each week one circle will disappear to
show the remaining filter life time.
This is how the Life Time Indicator works:
1. Push the STATUS button to activate the display.
2. To see the status of the filter; press the button
once. For example; when four blinking lights are
visible the filter is 100% new with four weeks of
usage.
3. To reset the timing press the button.
4. Change the filter when all the lights are blinking.
2. Change filters
• Wash your hand.
• Fill the clean jug with cold water.
• Remove the protective wrapper from the
PUREADVANTAGE™ filter.
• Immerse the PUREADVANTAGE™ filter in the cold
water and shake it gently fifteen to twenty times
to remove air bubbles.
• Remove the PUREADVANTAGE™ filter and discard
the used water.
• Push the filter downwards until it fits firmly and is
placed in line with the bottom of the hopper.
4

English

How to activate the filter:
o Place the jug under the tap and fill the jug twice.
o Discard the filtered water before start using the
jug.
3. Usage of AquaSense ™:
Place the Jug under the tap inposition with the pour
through filling lid
4. AquaSense™ Capacity
• Large Jug: 1.6 liters filtered water capacity (2.3
liters total capacity)
• Small Jug: 1.2 liters filtered water capacity (1.6
liters total capacity)
5. Lifetime for the PUREADVANTAGE™ filter
• The PUREADVANTAGE™ filter achieves a filter
capacity of approximately 150 liter of tap water.
• We recommend changing the PUREADVANTAGE™
filter after 30 days to keep optimized
performance.
• To change the filter; pull the ring on the
PUREADVANTAGE™ filter. See : - 2. Change filter –
Store the PUREADVANTAGE™ filter
Store the sealed PUREADVANTAGE™ filter in a cold and
dry place in no direct sun light sealed in the plastic
packaging to keep the optimized performance of your
filter.
Care of AquaSense™ and the PUREADVANTAGE™
filter
• We recommend to store your jug in a cool
and shady place and remember that water is a
foodstuff. See also "Hygiene"
• The AquaSense™ Jug (excluding the Life Time
Indicator) is dish washer safe.
Before cleaning your AquaSense™ Jug in the dish
washer, remove the Life Time Indicator.
• Use only batteries type LITHIUM CR2032. Batteries
must be removed from the appliance before it is
scrapped and are to be disposed of safely