Lenovo ThinkSystem SE350 Guide De Configuration page 131

Tableau 62. Définition de la NAT source pour le trafic UDP et TCP
sudo uci add firewall redirect
sudo uci set firewall.@redirect[-1].enabled=1
sudo uci set firewall.@redirect[-1].src=lan
sudo uci set firewall.@redirect[-1].src_ip=10.55.34.85
sudo uci set firewall.@redirect[-1].src_dip=63.240.161.99
sudo uci set firewall.@redirect[-1].dest=wan
sudo uci set firewall.@redirect[-1].dest_port=123
sudo uci set firewall.@redirect[-1].target=SNAT
sudo uci commit firewall
sudo /etc/init.d/firewall restart
Paramètres du client OpenVPN
oper@OpenWrt:~$ scp jackshih@192.168.70.200:/home/jackshih/my-vpn.conf /home/oper/openvpn/my-vpn.conf
oper@OpenWrt:~$ scp jackshih@192.168.70.200:/home/jackshih/pass.txt /home/oper/openvpn/pass.txt
Remarque :
oper@OpenWrt:~$ sudo uci set openvpn.custom_config.config='/home/oper/openvpn/my-vpn.conf'
oper@OpenWrt:~$ sudo uci commit openvpn
oper@OpenWrt:~$ sudo uci set openvpn.custom_config.enabled='1'
oper@OpenWrt:~$ sudo uci commit openvpn
Remarque :
oper@OpenWrt:~$ sudo uci set network.vpn.ifname='tunnel_name'
oper@OpenWrt:~$ sudo uci commit network
oper@OpenWrt:~$ sudo /etc/init.d/network restart
/home/oper/openvpn/
123