IP CLEANING SG-20 New Steamy Manuel D'instructions page 32

FITTING THE MULTIPURPOSE BRUSH
To install the bristled frame for fitted and non-fitted carpets
(26), introduce the stiff brushes into the appropriate guides
with the tabs facing inwards (Fig. 9).
To fit the desired bristled frame to the brush body simply
place the former against the latter and press one against
the other until the little lever on the outside of the brush body
is fully engaged in the slot provided (Fig 10).
To remove the bristled frame, disengage the lever from the
brush body.
NOZZLE
Suitable for specific jobs. Use the nozzle to clean tile joints
or seams in seats or sofas, where dirt is particularly stubborn.
TEXTILES TOOL
A useful tool for cleaning sofas, armchairs, mattresses, car
seats and particularly narrow areas where the multipurpose
brush cannot reach.
WINDOW-WIPING BRUSH
Particularly suitable for cleaning windows and mirrors. For
correct use, follow the instructions below:
- Steam the surface you want to clean by placing the bristles
of the brush against it.
- Press the rubber blade onto the surface and vacuum any
water on the surface by moving the tool vertically from top
to bottom (Fig.11).
EXTENSION TUBES
Fit the extension tubes as needed and lock them into position.
You may also use one single extension tube (Fig.12).
Fig. 9
Fig. 10
Fig. 11
Fig. 12
28