Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
To increase the intensity of the channels:
Press and hold the <UP/CHASE REV> button
o
o
Press and hold the <PRESET A x> button for channels 1 to 12. Use the <PRESET B x>
button for channels 13 to 24.
You will see that the intensity will slowly increase on your display (and your fixtures)
o
Release the buttons as soon as you have reached the desired intensity.
o
To decrease the intensity of the channels:
Press and hold the <DOWN/BEAT REV> button
o
o
Press and hold the <PRESET A x> button for channels 1 to 12. Use the <PRESET B x>
button for channels 13 to 24.
o
You will see that the intensity will slowly derease on your display (and your fixtures)
Release the buttons as soon as you have reached the desired intensity.
o
Repeat these steps till you have the desired settings
To exit the edit mode:
Press and hold the <RECORD/SHIFT> button
o
Press and release the <KILL/REC EXIT> button
o
Release the <RECORD/SHIFT> button
o
The normal output of the controller is shown again
o
!! The modifications will be stored directly; there is no possibility to undo the modifications.
B. Add scenes:
This method gives you the possibility to add a new scène to the chase. Repeat this method to add several
scenes.
Be sure that the program mode is activated.
Be sure that Chase/Scenes is activated.
Bring all the Preset B faders to their lowest position
Clear the working memory:
Press and hold the <RECORD/SHIFT> button
o
Press and release the <PAGINA/REC CLEAR> button
o
o
Release the <RECORD/SHIFT> button
Set the new scene, so that it appears on the green leds (and fixtures), eventually in Single
Preset mode to be able to use 24 channels
Press and hold the <RECORD/SHIFT> button. The scene is now recorded in the working
memory
If you have activated the Single Preset mode to compose scenes, you have now to activate
again the Chase/Scenes mode.
Bring all the Preset A and B faders to their lowest position
Choose the desired page by using the <PAGINA/REC CLEAR> button
Place the Preset B x fader in edit mode
Press and hold the <EDIT/ALL REV> button
o
o
Press and release the <PRESET B x> button
Release the <EDIT/ALL REV> button
o
The yellow Led above the Preset B fader will lit and the actual scène is shown.
o
Press the <STEP> till you have reached the scene that should come NEXT to the scene that you
want to insert.
Press and release the <INSERT/0% OR 0-255> button.
To exit the edit mode:
Press and hold the <RECORD/SHIFT> button
o
Press and release the <KILL/REC EXIT> button
o
Release the <RECORD/SHIFT> button
o
The normal output of the controller is shown again
o
C. Delete scenes:
!! It is inpossible to recover deleted scenes.
Be sure that the program mode is activated.
Be sure that Chase/Scenes is activated.
Move all the Preset A faders to their lowest position
Choose the desired page by using the <PAGINA/REC CLEAR> button
JB SYSTEMS
17/93
®
OPERATION MANUAL
CMX24
ENGLISH
Place the Preset B x fader in edit mode:
Press and hold the <EDIT/ALL REV> button
o
o
Press and release the <PRESET B x> button
Release the <EDIT/ALL REV> button
o
The yellow Led on top of the de Preset B will Lit and the actual scene is shown.
o
Select the scene that you want to delete by using the <STEP> button.
Press and release the <DELETE/REV ONE> button
If needed, choose another scene by using the <STEP> button en delete it by using the
<DELETE/REV ONE> button
To exit the edit mode:
Press and hold the <RECORD/SHIFT> button
o
Press and release the <KILL/REC EXIT> button
o
Release the <RECORD/SHIFT> button
o
The normal output of the controller is shown again
o
Empty a preset B fader
!! it will not be possible to undo this action !!
Be sure that the program mode is activated.
Press and hold the <RECORD/SHIFT> button
Press and release the <PRESET B x> button of the desired preset B fader
Press and release the <PRESET B x> button of the desired preset B fader
(So the preset B x button has to be pressed 2 times).
Release the <RECORD/SHIFT> button
Copy Preset B fader
!! Only possible with scenes!!
If you want to copy a scene to another preset B fader to use again the same scène or to use it as a base for
a new scene.
Be sure that the Chase/Scene mode is activated
Bring all the preset A faders (or the master A fader) to their lowest position
Bring all the preset B faders to their lowest position
Bring the Master B fader to its lowest position (100%)
Modify the page if necessary
Move the preset B fader of the scene that you want to copy to 100%
<RECORD/SHIFT> + <PAGINA/REC CLEAR> to delete the working memory
<RECORD/SHIFT> to store the scene
Modify the page if necessary
<RECORD/SHIFT> + <PRESET B x> to store the scene in another preset B fader, the scene is
now copied
Delete a CHASE
To delete a chase or a scene from a preset B fader in Chase/Scenes mode:
Use the <PAGINA/REC CLEAR> button to select the page
Press and hold the <RECORD/SHIFT> button
Press and release the <PRESET B x> button
Press and release the <PRESET B x> button again
Release the <RECORD/SHIFT> button
Blind/Home
In Chase/Scenes mode u can use the <Blind> and the <Home> buttons. These buttons are not used in
Single Preset and Double Preset mode.
Preset A
To disconnect the channels 1 to 12 from the preset B scenes/chases:
Press and hold the <BLIND> button
o
Press and release the <Preset A x> button
o
Release the <BLIND> button
o
The level will only be determinated by using the preset A fader, master A fader and the flash buttons.
JB SYSTEMS
18/93
®
OPERATION MANUAL
CMX24
Publicité
