Publicité
Les langues disponibles
Les langues disponibles
Base frame
Serves to stabilise the lift and contains the front rollers which drive the lift.
Drive kit
Serves to drive and position the lift. The procedure may only be carried out when empty
without a load.
Control box
The complete electrical control system is located here. All buttons are protected by a front ring
in order to prevent them being pressed accidentally. Furthermore, all movements are
immediately stopped when the buttons are released (dead man's control).
Release magnet
Electromagnet for releasing the safety catch during the lowering process.
The safety catch prevents the lift from lowering autonomously in the case of an error.
Hydraulic unit
The hydraulic oil is fed from the tank to the lifting cylinder by a gear pump driven by an
electric motor. The lowering valve allows the oil to flow back into the tank.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-09
Manufacturer ATH-Heinl GmbH & CO.KG
- 5 -
Publicité
