General Information - Girmi ST62 Manuel D'utilisation

offices and other working environments; by clients in
hotels, motels and other residential type environments;
farm houses, bed and breakfast type environments.
- The appliance is not intended to be operated by means
of an external timer or separate remote-control system.
- Before every use, unroll the power cord.
- Use original spare parts and accessories only.
Do not subject the product to strong impacts, serious
damages may result.
- Do not use near or under flammable materials (like
curtains), heat, cold spots and steam.
At first use, remove the protective film of the plate; due to
the presence of a protective oil and residues left over from
the film, the plate could emit some smoke. After few
uses, the smoke will disappear.
When using the product the first time, repeatedly use
steam (away from clothes) and try to use the iron on a
worthless piece of cloth to remove any manufacturing
residues that may stain or scratch the fabric.
When not in use, the iron must be stored upright.
Keep the power cord free from knots and tangles.
Do not wrap the power cord around the iron, either before
or after use.
It is recommended not to use too frequently the button
called "steam shock" (steam shot), because it decreases
the temperature of the iron plate which may cause drips of
water instead of steam.
Do not use the ironing system as a heating unit.
Always unplug before you fill or empty the tank.
Do not fill the tank above the maximum capacity and do
not introduce into the tank mixtures for removing stain,
vinegar, descaling agents or chemicals in general.
Always select the most suitable temperature according to
the fabric to be ironed.

GENERAL INFORMATION

11