Safety Instructions - Uniteck UNIFIX 300 B Manuel D'instructions

UNIFIX 300 B
PANEL COMPATIBILITY
With the design based on the use of Oblong drilling, Unifix can be used with different kind of panels on the
market.
Unifix 300B is ment to fix 1 or 2 panel(s), with the spacings and dimensions of panels as indicated below.
Unifix 300B
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load with
the panel:
Support
Unifix 300 B = 9.2 KG
Fastening: to prevent large quantities of snow from accumulating behind the sensor, install appropriate
barrier grids.
The position of the solar panel influences your electrical production. Choose the most optimal inclination
and orientation to suit your environment. Avoid shaded areas or objects that are a source of shadow (eg
tree)

SAFETY INSTRUCTIONS

• Take the appropriate mesures to prevent accidents during your mounting steps.
• If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk
of getting burnt. Make sure to protect yourself accordingly.
•
When finished, check and ensure that all of your brackets and panels are fixed properly
9
H (e)
Centre distance and panel dimensions
Spacers for fastening
Number of
of each panel
panels
(in mm)
x 2 L (e)
x1
● 150 > 1600
● 150 > 550
Unisun 100.12M (x2) / 100.24M (x2)
/110.12BC (x2) / 150.12M / 150.12BC /
200.24M / 300.12M
www.uniteck.fr
L (p)
L (e)
Panel Dimension
H (e)
L (p)hh
400 > 1030 No maxi
Panels
= 15kg / 15kg / 14kg / 9,8kg / 9,3kg /
16,6kg / 18kg
H (p)
Total weight
Max
Of panels
(In Kg)
H (p)
1200
35
880
EN