BEA IXIO-DT1 V Manuel D'instructions page 2

READ BEFORE BEGINNING INSTALLATION/PROGRAMMING/SET-UP
LED-SIGNAL
(green)
Motion detection
LED flashes
INSTALLATION
The sensor should
be mounted securely
to avoid extreme
vibrations.
MAINTENANCE
SAFETY
The door control unit
and the header cover
profile must be correctly
grounded.
Page 2 of 9
LED flashes x
times
x
Do not cover the sensor.
It is recommended to clean
the optical parts at least once
a year or more if required due
to environmental conditions.
Only trained and
qualified personnel
are recommended for
installation and set-up of
the sensor.
(red)
Presence detection
LED flashes
red-green
Avoid moving objects
and light sources in the
detection field.
Following installation,
always test for proper
operation (according
to ANSI 156.10) before
leaving the premises.
LED flashes
quickly
Avoid highly reflective
objects in the infrared
field.
Do not use aggressive
products to clean
the optical parts.
The warranty is invalid if
unauthorized repairs are
made or attempted by
unauthorized personnel.
75.5816.09 IXIO-DT1 V UL 20180305
LED is off