Publicité
Les langues disponibles
Les langues disponibles
2.2
Unpacking the machine
Remove the top cover of the packaging and make sure that no damage has occurred
during transport.
Remove the safety bolt to remove the machine from the pallet / rack.
Use a suitable lifting device (possibly with a stopping rope) to lower the machine from the
pallet / frame.
The packaging material used for the machine should be stored carefully.
Keep the packaging material out of the reach of children as it may be hazardous.
2.3
Delivery Contents
1
Package with:
•
Scissor lift with hydraulic cylinders and hydraulic power unit already installed
Drive-on ramps
•
Control unit with built-in hydraulic unit
•
•
Operating instructions with test book
Dimensions: 206cm X 195cm X 53cm
Weight: 710 kg
If there is anything missing in the scope of delivery please contact our sales department!
Instructions for transport and storage:
-
Lift with care, support the load with means which are suitable and in good order and condition.
-
Avoid sudden raisings and jerky movements. Be careful at floor unevenness, cross-drain etc.
-
Store the removed packing at a collecting place until disposal, so that they are not accessible for
children or animals.
-
Storage temperature: -10～+40 °C
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2022-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 9 -
Publicité
