ATH-Heinl Flex Lift 30 Manuel D'utilisation page 53

2.0 INSTALLATION
The machine must be installed by an authorised person according to the instructions.
The operating instructions (including the log) are an important part
The product must be checked after completion of the installation, handover, if necessary briefing and then
regularly in accordance with the applicable regulations and legal provisions in the country of operation by a
suitable and approved company or facility.
Floor foundation
Requirements:
Concrete thickness:
Max. gradient:
Concrete quality:
Concrete curing time:
If soils do not comply with the requirements, there could evoke serious injuries to personal or
damages to the lift. Do not install the lift on asphalt, soft concrete floor etc.
The capacity of intermediate
2.1 Transport & Storage Conditions
When transporting and positioning the machine, always use suitable lifting and material handling
equipment and consider the machine's centre of gravity.
The machine should only be transported with the original packaging.
Data:
Width
Length
Height
Storage temperature
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2022-03
of the machine / product.
!!!PLEASE STORE CAREFULLY!!!
ceilings must be checked by the operator
Manufacturer ATH-Heinl GmbH & CO.KG
- 8 -
horizontal and even
200 mm
10 mm
C20/25
Min. 20 days
----
195 cm
206 cm
53 cm
-10 to +50 °C