Finishing The Massage; Maintenance - Casada CANOO V Mode D'emploi

Finishing the massage

SAFETY DEVICE
If too much pressure is exerted on the massage heads they stop moving. If this happens, please dis-
connect the power plug, wait 3 seconds and insert the power plug once more. Then you can use the
device again.
Button Description
Press the ON/OFF button to end the massage.
The device must be disconnected from the power supply after each use. The mas-
saging device must be set back into its original position and stowed away.
If you do not use the device for a long period of time then make sure to disconnect
WARNING
the power plug.
Bring the massage device back to its starting position.
26

Maintenance

The power plug must be disconnected for cleaning and maintenance.
•
Do not touch the power plug with wet hands.
•
Please do not use benzine, thinner, bleach etc. This can lead to colour change,
•
deformation or damage.
Exercise caution when cleaning the fabric. If the fabric appears to be damaged,
•
do not use it any longer. Contact our customer service in order to avoid injuries.
NEVER use the device without fabric!
•
Please do not leave small children in the vicinity of the device after removing the
•
fabric. This can lead to accidents or injury.
Use a neutral cleaning agent with lower concentration and a soft cloth.
•
This can be used to clean the device. Use just a small amount of mois-
ture!
Use this to wipe the surface and then follow with a dry cloth.
•
Removing and washing the fabric cover:
•
[1]
First, pull the adjustable parts of the leg area upwards
[2] Locate the zip fastener in the fabric cover.
[3] Open this in the direction of the arrow and remove the fabric.
[4] Use the washed fabric only once it is dry again.
27