Garden Treasures 07-168 Mode D'emploi page 6

TROUBLESHOOTING
PROBLEM
Pump does not
pump water.
THE FOUNTAIN COMES PREASSEMBLED, BUT IF SOMETHING HAPPENED DURING
TRANSPORT, HERE'S HOW TO ASSEMBLE IT.
ASSEMBLY INSTRUCTIONS
1. Cover the pump with the filter net to help prevent
debris from jamming the pump. Guide the pump
cord through the pole on water reservoir (B) and
run the cord through the outlet in the base.
POSSIBLE CAUSE
1. No power.
2. Reservoir is not full.
3. Fountain reservoir is too dirty.
4. Dirt stuck on pump water intake.
5. Pump impeller is not moving.
6. Pump is not assembled correctly.
CORRECTIVE ACTION
1. Make sure the power cord is
properly connected.
2. Refill by pouring water into
reservoir.
3. Make sure reservoir has no
dirt or other impurities.
4. Make sure the pump's water
intake is not obstructed and
clean properly.
5. Slowly turn the impeller to see
if it is broken or jammed.
Remove any debris.
6. Disconnect the power supply
and check pump assembly.
1
B
Lowes.com/gardentreasures
6
bottom view
outlet
®