Operation - Gardena 19031 Mode D'emploi

To fit anti-theft device
(optional):
q
w

4. OPERATION

Operation with the GARDENA
smart App:
Settings of the
Water Control:
Factory Reset:
To secure your Water Control against theft, you can obtain
the GARDENA Anti­theft device Art. 1815­00.791.00 from
GARDENA Service.
1. Screw clamp
Water Control.
2. Use clamp (11)
It is no longer possible to remove the screw after it has been
screwed in.
A connected smart Gateway is required for the operation of the
smart Water Control.
The smart Water Control must be connected via the GARDENA
smart App.
The smart Water Control is operated by the GARDENA smart App.
The GARDENA smart App can be downloaded from the Apple
App Store or the Google Play Store.
– watering start time / end time
– watering cycle (day / frequency)
– watering dependent to sensor
– manuel operation by App
The smart Water Control will be reset to the factory settings.
v Push the factory reset button
r
(11) with screw (12) firmly to the back of the
e.g. for fixing a chain.
(14) .
13