Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INTRODUCTION
Thank you for deciding to purchase the Malling Perching Stool from Aidapt. The Malling
Perching Stool range is manufactured from the finest material and components available,
when installed and used correctly it is designed to give many years of reliable trouble-free
service. The Malling Perching Stool is available with optional arms, back or padded back.
Malling Perching Stools are delivered complete and do not require assembly.
N.B. This equipment must be installed by a competent person and a risk assessment
may be needed as to the suitability of the chair for the particular user.
VG833
Malling Perching Stool (Plain)
VG834
Malling Perching Stool (Arms Only)
VG835
Malling Perching Stool (Arms & Plain Back)
VG836
Malling Perching Stool (Plain Back Only)
VG837
Malling Perching Stool (Arms & Padded Back)
VG837P
Malling Perching Stool (Padded Arms & Padded Back)
VG837B
Black Malling Perching Stool (Arms & Padded Back)
VG837BR
Brown Malling Perching Stool (Arms & Plain Back)
159 kg (25 stone) weight limit.
Do not exceed the weight limit stated – doing so could damage the equipment or put
the user at risk.

BEFORE USE

Carefully remove all packaging. Avoid using any knives of other sharp instruments as this
may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault, do not
use your product, but contact your supplier for support.
USE OF THE PERCHING STOOL
When moving always lift the perching stool by placing you hands on the tubular metal frame
beneath the seat.
Do not allow children or unauthorised persons to play with or use the stool.
Do not rock back and forth or sideways when using the stool as this will cause
excessive stress and possible damage and failure which may cause injury.
Fixing and Maintenance Instructions
2
Ver. 5 05/2014 (1549)

Publicité

Table des Matières
loading

Table des Matières