EGAmaster 56930 Manuel D'instructions page 6

The wrench should be re-calibrated periodically. The calibration of the wrench should be
checked at least once a year, after any abnormal handling or overloading, or after 5,000 cycles
("clicks").
6
Hardened alloy steel housing.
EASY TO READ DUAL SCALES:
Metric Unit N.m
English Unit Lb.ft or Lb.in
Knurled Grip To Hold Close
OPERATION INSTRUCTION
Rotate
memory
needle
Red pointer needle will
push memory needle.
Eyes to the scale.
Memory needle
points to "0".