Table Des Matières; Specifications - Dyna-Glo Pro EG7500DGP Instructions D'installation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ITEM
SPECIFICATIONS ...........................................................................
SAFETY INFORMATION .................................................................
LOCATING HEATER .......................................................................
PRE-INSTALLATION .......................................................................
INSTALLATION ...............................................................................
OPERATING INSTRUCTIONS ........................................................
MAINTENANCE ..............................................................................
REPLACEMENT PARTS .................................................................
TROUBLESHOOTING ....................................................................
Rating
Switch Setting
7500W
5000W
Rating
Switch Setting
5600W
3700W
THIS HEATER REQUIRES HARDWIRE INSTALLATION (NO PLUG). THE INSTALLATION OF THIS
PRODUCT MUST BE CARRIED OUT BY A CERTIFIED ELECTRICIAN AND IN ACCORDANCE WITH
ALL LOCAL AND NATIONAL ELECTRICAL CODES.
NOTE: COMPATIBLE WITH A 240V LINE VOLTAGE DOUBLE POLE WALL THERMOSTAT. MUST BE
INSTALLED BY A CERTIFIED ELECTRICIAN.
READ AND UNDERSTAND ALL INSTALLATION & OPERATION INSTRUCTIONS PRIOR TO
OPERATING THIS UNIT. OBSERVE ALL SAFETY INSTRUCTIONS.
1. Use only copper wires rated for at least 60ºC.
2. Heater air flow must be directed parallel to or away from adjacent wall.
3. Observe all wall, floor and ceiling clearance requirements.
4. All wiring must be done according to national and local electrical codes. The
heater must be grounded as a precaution against possible electrical shock.
Heater circuit must be protected with proper fuses.
5. The mounting structure and the anchoring hardware must be capable of
supporting the weight of the heater and the mounting bracket (if used).
TABLE OF CONTENTS

SPECIFICATIONS

Volts
II
240
I
240
Volts
II
208
I
208
SAFETY INFORMATION
WARNING
Phase
Hz
AMPS
60
31.25
1
60
20.9
1
Phase
Hz
AMPS
60
26.9
1
60
17.9
1
3
PAGE #
3
3
4
5
6
10
12
12
13
BTU/hour
22590
17060
BTU/hour
19107
12625

Publicité

Table des Matières
loading

Table des Matières