Transport And Storage; Installation Into The Piping - Garlock GAR-SEAL Instructions De Service

Do not take off manual lever, gearing or drive while being in operation situation of pressure!
Attention
2.4 Marketing
The Garlock valve is marked on the type label / on the body with the following data:
Type Label
GAR-SEAL
111-W-MT
GGG40.3 - PTFE - PTFE
DN 150-6 PN 10
3
Ps=16 bar Tsmax=200 C
06-05-2555
GARLOCK GmbH D-41468 NE.
0035
Type Label
MOBIL-SEAL
111-W-TW-MT
GGG40.3 - PTFE - PTFE
DN 050-2 " PN 10
Ps=10 bar T -40 / +200 C
18-12-2555
14432-2014
GARLOCK GmbH D-41468 NE.
0035
3

Transport and storage

The Garlock GAR-SEAL valve must be handled, transported and stored with care:
– The valve must be stored and transported in its closed original packaging (including to the place of
installation).
– The packaging protects the sensitive lining of the valve from damage.
– If the valve is stored before it is installed it should be stored in a closed room and be protected from dirt,
humidity or ozone.
– The sealing surfaces of the flange ends for the piping connection are not damaged, neither by mechanical
nor by other influences.
– Do not stack valves!
– The Garlock valve is supplied with slightly open valve disc (transport position approx. 10°). Therefore, it
must be stored in the way it is supplied. The locking valve must not be operated.
Line For
1 Type of valve
2 Type key
Material body/
3
lining/disc
4 Nominal width pressure stage
5 Max. per. pressure, max. per. temp Ps 16 bar
6 Serial No. (year of construction)
7 For customer-specific marking
8 Garlock address
Conformity ID-no.
9
named place
Line For
1 Type of valve
2 Type key
Material body/
3
lining/disc
4 Nominal width pressure stage
5 Max. per. pressure, max. per. temp Ps 10 bar
6 Serial No. (year of construction)
7 Norm
8 Garlock address
Conformity ID-no.
9
named place
19
Marking
GAR-SEAL
111-W-MT
GGG40.3 (0.7043) / PTFE / PTFE
DN 150 – 6" PN 16
Ts max 200 °C
Numbers 1-2: year, Numbers 3-4:
month, Number 5-8: serial no.
Garlock GmbH, 41468 Neuss
CE (conf. 2014/68/EU) 0035 (TÜV
Rheinland Industrie Service GmbH)
Marking
MOBIL-SEAL
111-W-TW-MT
GGG40.3 (0.7043) / PTFE / PTFE
DN 050 – 2" PN 10
T -40 / +200 °C
Numbers 1-2: year, Numbers 3-4:
month, Number 5-8: serial no.
EN 14432 - 2014
Garlock GmbH, 41468 Neuss
CE (conf. 2014/68/EU) 0035 (TÜV
Rheinland Industrie Service GmbH)
Leaders in Sealing Integrity