Toshiba PDR-M4 Mode D'emploi page 77

Copying Images (continued)
Use the
and press the ENTER button.
This fixes the image to be copied, and [
image.
To cancel a selection, press the ENTER button again.
If you want to copy two or more images, repeat the procedure for the
necessary number of images.
The bar at the bottom of the screen indicates the amount of buffer
memory used to store the date of the images which have been
selected, and the remaining memory space. The amount of memory
space consumed is indicated in green.
Use the
The screen indicating that the image is being read appears.
Load the SmartMedia for copying the image to.
The message [CHANGE CARD] is displayed.
q Remove the currently loaded SmartMedia.
w Load the copy destination SmartMedia.
or buttons to select the desired image,
or buttons to select [EXEC], and press the ENTER button.
] is displayed under the
- 75 -