Toshiba PDR-M4 Mode D'emploi page 65

Changing the Preset Conditions (REC MENU) (continued)
PREVIEW
This setting allows you to display a photographed image on the LCD monitor for two seconds
immediately after you have taken the shot.
This allows you check the composition and brightness of the photographed image.
Note, however, that detailed areas are not sharp as the resolution of preview images is low. To check
detailed areas and focus, record the image to SmartMedia and check it in the [
Page 65).
To cancel preview, press the shutter button half way down again.
[ O F F ]
[ O N ]
COLOR
Sets the color mode in which the image is to be recorded.
[ C O L O R ]: Color (default)
[B&W]
SHARPNESS
Sets the sharpness at which the image is to be recorded.
[NORM.] : Normal sharpness (default)
[ S O F T ]
[HARD]
: Do not display preview (default)
: Display preview
: Black and white
: Soft effect
: Hard effect
- 63 -
] playback mode (