Installing Pivot v2 into Hitch
1
Slide Pivot v2 into hitch and align the hitch pin holes.
™
2
Insert hitch pin and
secure with hitch lock.
3
Fully tighten FlatLock
using the provided 8mm hex key.
Do not exceed 25 ft/lbs (34Nm).
Rack Installation
1
Slide accessory rack into the Pivot v2
and align the hitch pin holes.
2
Secure accessory rack
using hitch pin.
3
Tighten accessory rack.
™
1
hitch cam
TM
2
™
3