Publicité
Included
Toggle Clamp
(2) Lock Keys
These instructions depict the Pivot v2
Assembly and installation steps for the
Assembly
1
Using the 8mm hex key, remove tape and attach the
pre-assembled toggle clamp post with (1) M14 x 50 bolt
and (1) M14 lock washer.
Tighten bolt to 20 ft/lbs (27Nm).
TOGGLE CLAMP POST
ASSEMBLY
Hitch Lock
Hitch Pin
(4) M8 Lock Washer
Passenger Side
™
Driver Side
8mm Hex Key
5mm Hex Key
M14mm
Lock Washer
M14 x 50mm
Bolt
Toggle Clamp
Post
(4) M8 x 12
Bolt
swing.
are identical.
Publicité
