Technical Specifications; Disposal Of Old Electrical Appliances; Technical Support Service And Warraty - cecotec BAMBA SkinCare Silky Manuel D'instructions

ENGLISH
• Do not immerse the appliance in water or any other liquid, or place it under running
water.
• If water enters the device by accident, do not use it again until it is completely dry.
• Use a soft damp cloth with some water to clean the product's surface.
• Dry thoroughly the device with tissue paper after cleaning it.
• The sandpaper attachments must only be cleaned using a dry cloth or the cleaning
brush.
• Do not use chemical detergent or scouring agents for cleaning.

6. TECHNICAL SPECIFICATIONS

Product name: Skin Care Silky
Product reference: 04222
100-240 V ac/50-60Hz
Operating temperature: +15º-+35º
Storage temperature:0º-+40º
Made in China | Designed in Spain

7. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE), specifies that old household electrical appliances must not be disposed of
with the normal unsorted municipal waste. Old appliances must be collected
BAMBA SKINCARE SILKY
18
separately, in order to optimize the recovery and recycling of the materials they contain, and
reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation to
dispose of the appliance correctly. If the product has a built-in battery or uses batteries, they
should be removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.
8. TECHNICAL SUPPORT SERVICE AND WARRANTY
This product is under warranty for 2 years from the date of purchase, as long as
the proof of purchase is submitted, the product is in perfect physical condition,
and it has been given proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
• The product has been used for purposes other than those intended for
it, misused, beaten, exposed to moisture, immersed in liquid or corrosive
substances, as well as any other fault attributable to the customer.
• The product has been disassembled, modified, or repaired by persons, not
authorised by the official Technical Support Service of Cecotec.
• Faults deriving from the normal wear and tear of its parts, due to use.