Before Use; Operation - cecotec BAMBA SkinCare Silky Manuel D'instructions

ENGLISH
capabilities or lack of experience and knowledge.
Supervise young children to make sure that they do
not play with the appliance.

3. BEFORE USE

1. Take the product out of the box.
2. Remove all packaging materials. Keep the original box.
3. Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.

4. OPERATION

Warning: If any problem occurs, interrupt operation immediately and contact your doctor.
Charging
• Make sure the appliance is switched off during charging
• The LCD light indicator will blink blue while the device is being charged.
• The LCD light indicator will turn on steady blue when the battery is fully charged.
BAMBA SKINCARE SILKY
16
• The device's charging time is 1.5 hours.
• Once the device is fully charged, discharge it through normal use.
• The device can be operated cordless when charged. This mode's operating time is 45
minutes.
• In case of low voltage, the LCD light indicator will blink blue.
How to optimize the battery's lifespan
• Disconnect the product from the power supply when the battery is charged.
• Do not leave the switch adapter plugged into the wall socket for more than 24 hours.
• Discharge the battery completely twice a year by letting the motor run until it stops.
Then fully recharge the battery.
• The best environmental temperature for charging and operating of the device is
between 15 ºC and 35ºC.