Setting The Temperature; Steam Ironing - Aigostar 8433325501136 Manuel D'instructions

IRONING LABEL

SETTING THE TEMPERATURE

Insert the plug in the wall socket and stand the iron upright.

Turn the temperature control dial (6) to the desired temperature setting.

The desired temperature has been reached when the pilot light has turned off. The

pilot light will turn on and off from time to time, indicating that the selected
temperature is being maintained.

STEAM IRONING

This function can be used only at higher ironing temperature.
●●
●●● or MAX
Fill water into the iron as described on page 3.

Stand the iron upright.

Connect he iron to a suitable mains supply outlet

Turn the temperature control dial(6) to the "●●", "●●●"or MAX setting

The pilot light turns off when the required temperature is reached. The iron is ready

for use.
Turn the steam control knob(3) to the required position, steam starts coming out from

the holes in the sole plate.
Notice: With conventional steam ironing ,water may leak from the sole plate if too low a
temperature has been select. If this happens, turn the temperature control dial(6) to the
advised position. Steam will recommence as soon as the appropriate temperature has
KIND OF TEXTILE
Synthetic
Synthetic
Synthetic
Silk
Wool
Cotton
Linen
for moderate steam
for maximum steam
FABRICS
Acrylic
Polypropylene
Polyurethane
Acetate
Triacetate
Polyamide (Nylon)
Polyester
Viscose(Rayon)
Silk
Wool
Cotton
Linen