Voltage Selection - Aigostar 8433325501136 Manuel D'instructions

IRONING
Important: Have you read the section" Important Safeguards"?

Voltage selection

The iron has a selection of two kinds of voltage 115 v / 800 w and 230 v / 800 w
Change the voltage needed a keyword tools, Specific operation as shown in the figure below
115V
CHOICE OF WATER
This iron can be used with normal tap water.

If the water in your area is particularly hard, it is advisable to use distilled or

demineralized water.
Do not use chemically descaled water or any other liquids for refilling.

HOW TO FILL IN WATER
Set the steam control knob(3) to "0" and the temperature control dial(6) to "OFF".

 Unplug the iron from the wall outlet, and wait for the iron to cool down.
Pour water into the water inlet (2):

-Fill up to the maximum level "MAX" of the water tank.
TEMPERATURE CONTROL SETTING
Always check garment label for ironing instructions before ironing garment.

If the ironing instructions are missing, then the table below may help you.

First you should sort the laundry: Wool with wool, Cotton with cotton etc. Start

ironing the fabrics requiring the lowest temperature and progress to the higher ones
because the iron heats up quicker than it cools down.
 If the fabric consist of various kinds of fibres (e.g. cotton with polyester ) you must
always select the ironing temperature for the material with the lowest advised
temperature.
230V
Toggle switch voltage to 230 v power supply
connected to the voltage of 230 v, toggle switch
to another section is 115 v.Please according to the
national voltage selection.