Thetford SHB16950Y Mode D'emploi Et D'installation page 14

Location
The appliance MUST be positioned free from draughts, which may affect the combustion and other fire
hazards.
It MUST also be positioned in a manner that will prevent the accumulation of unburnt gas.
This appliance may be installed in a kitchen / kitchen diner, but not in a room containing a bath or a
shower.
Propane appliances MUST NOT be fitted below ground e.g. in a basement.
ALL combustible materials such as curtains and shelves MUST be kept well clear of the appliance, and
their installation should meet all relevant local and state regulations/standards in force.
Minimal Safe Distances
Maintain the minimum distances between the burners and side, rear, overhanging parts & any
adjacent devices. Any deviation could result in excessive temperature rise.
If the minimum dimensions must be reduced, due to design constraints, a temperature rise test of all
furniture fitted around the appliance must be performed.
Where the minimum dimensions are reduced, it is recommended to install non-combustible material
Check the allowable temperatures of the materials used via the standards mentioned in the
Introduction
Models with a glass lid, the distance to the rear of the appliance can be reduced to 1
Any adjoining wall surface situated within 4
combustible material for a height of 6" for the entire length of the hob.
1
/ " from the side MUST be made from a suitable non-
2
A ≥ 4.5" (115mm)
B ≥ 30" (760mm)
C ≥ W
D ≥ 1" (25mm)
E ≥ 4.5" (115mm)
F ≤ 13" (330mm) Max.
G ≥ 18" (460mm)
14
1
/
"
2