Cameo QUAD COLOUR LED PAR LIGHT Manuel D'utilisation page 13

OPERATION:
DMX-MODE SELECTION
Press the MODE button repeatedly until one of the 5 DMX modes appears
on the display (2CH, 3CH1, 3CH2, 4CH, 7CH). Press ENTER (the first digit
flashes) and use the UP and DOWN buttons to select the desired DMX
mode and confirm with ENTER. You will find tables with the channels of the
different DMX modes on the following pages of this manual.
DMX START ADDRESS
Press the MODE button repeatedly until "AXXX" appears on the display.
Press ENTER (the last three digits on the display will flash), and use the UP
and DOWN buttons to select the desired DMX start address between 001 and
512 (A001 - A512). Confirm with ENTER.
13