Ethernet Link Object (Code De Classe 0Xf6) - IFM VSE951 Notice D'utilisation

Electronique de diagnostic
Attribut Nom
4 Physical link object
- Path size
- Path
5 Interface configura-
tion
- IP address
- Network
mask
- Gateway
address
- Name Server
- Name Server 2
- Domain name
6 - Host name
10 - Select ACD
11 Last conflict detec-
ted
- ACD
Activity
- Remote MAC
- ArpPd
12 Ethernet/IP quick
connect
13 Encapsulation Inac-
tivity Timeout
Services communs
Code de service
0x01
0x0E
0x10
7.4.8 Ethernet link object (code de classe 0xF6)
L'Ethernet link object contient des informations d'état spécifiques de l'interface Ethernet (IEEE 802.3).
Attributs de la classe
Attribut Nom
1 Revision
2 Max instance
Type de don-
Accès
nées
Get STRUCT of
- UINT
- Padded
EPATH
Get, Set STRUCT of:
- UDINT
- UDINT
- UDINT
- UDINT
- UDINT
- STRINT
Get,Set STRING
Get,Set Bool
Set STRUCT of:
USINT
ARRAY of 6
USINTs
ARRAY of 28
USINTs
Get, Set BOOL
Get, Set UINT
Classe
oui
oui
non
Accès Type de données
Get UINT
Get UINT
Valeur / description
Path to Physical link object
Size of Path
Logical segments identifying the physical link object
TCP/IP Network Interface
configuration
The device's IP address
The device's Network mask
Default Gateway address
Primary Name Server
(always 0.0.0.0)
Secondary Name Server
(always 0.0.0.0)
Default Domain Name
(always empty)
Default Domain Name
(always empty)
0 = disable; 1 =enable (default)
Structure containing Information related to the last
conflict detected
State of ACD activity when last conflict detected
(0= No conflict detected (Default)
1= Probe Ipv4 Address
2= On going Detection
3= Semi Active Probe)
MAC address of remote node from the ARP PDU in
which a conflict was detected
Copy of the raw ARP PDU in which a conflict was de-
tected
0= disable(Default); 1= enable
Number of seconds of inactivity before TCP connec-
tion or DTLS session is closed.
Instance Nom de service
oui Get_Attribute_All
oui Get_Attribute_Single
oui Set_Attribute_Single
Valeur
4
2
VSE951
21