Pioneer Elite S-LX 70-LR Mode D'emploi page 6

7 Secure brackets together with screws.
Secure the brackets together by using the supplied screws (short)
at the screw holes located on the top of the left and right side of the
brackets.
If you cannot secure both sides (due to such cases as lack of space
to use a screwdriver), make sure that one side is secured with a
screw.
8 Secure speaker to wall with a cord.
Screw two picture hooks or similar into the wall behind the speaker.
Pass a thick cord (not provided) around the hooks and through the
metal catch so that the speaker is stabilized (make sure to test that
it supports the weight of the speaker).
• Do not attach the metal catch directly to the wall. It should only
be used in conjunction with reinforced string to prevent the
speaker from falling.
6
En
Sufficiently thick
cord (not provided)
Metal catch
Using separately sold stands
This speaker system can be placed on the floor by using speaker
stand CP-LX70 (floor stand). They can also be placed on shelves by
using speaker stand CP-LX70TS (tabletop stand).
For further information on attachment, refer to the instruction
manual of CP-LX70 or CP-LX70TS.
When using CP-LX70 When using CP-LX70TS