Indicatore Di Calore Residuo; Automatic Cooking; Extension Zone; Timer - Rainford RBH-6624 B Mode D'emploi

Indicatore di calore residuo

Dopo aver spento l'apparecchio, la piastra è ancora calda e il display indica [ H ].
Il simbolo [ H ] scompare quando la piastra può essere toccata senza pericolo di bruciature.
Finché la spia di calore residuo è accesa, non toccare la piastra né posizionarvi alcun oggetto
sensibile al calore: c'è rischio di bruciature o incendi.

Automatic cooking

All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at full
power during a certain time, then reduces automatically its power on the pre-selected level.
• Switching on the automatic cooking :
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
• Switching off the automatic cooking :
Action
Zone selection
Power level selection

Extension zone

Action
Zone select
Switch off
Switch on

Timer

The timer is able to be used simultaneous with all 4 heating zones and this with different time settings
(from 0 to 99 minutes) for each heating zone.
•
Setting and modification of the cooking time :
Action
Zone selection
Increase power
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts until the time reaches [ 00 ].
Control panel
Press key [ ]
Press key [ ]
Re-press key [ ]
Press key [ ]
Control panel
Press key [ ]
Press key [ ]
Control panel
Touch key [ ]
Touch key [ ]
Touch key [ ]
Control panel
Press key [ ] from the zone
Press key [ ] or [
Press key [ ]
Press key [ ]
Press key [ ]
61
Display
[ 0 ]
Pass from [ 1 ] to [ 9 ]
[ 9 ] blinking with [ A ]
[ 9 ] pass to [ 8 ] [ 7 ]
[ 7 ] blinking with [ A ]
Display
[ 7 ] blinking with [ A ]
[ 0 ]
Display
Control light is blinking
Extension zone light is off
Extension zone light is on
Display
[ 0 ]
] [ 1 ] to [ 9 ]
Timer [ 00 ] min
[ 00 ] wents to 60,59...
The time increases