Testboy Pocket 100 Mode D'emploi page 22

Operation
Capacity measurement
In order to measure the capacities, rotate the selector switch (3) to the position
the measurement probes on the test object. The multimeter automatically sets itself to the most
favourable measurement range.
Pay attention to deenergization and, before measurement, discharge the
condensers.
Range Resolution
60 nF 0.01 nF
600 nF 0.1 nF
6 uF 1 nF
60 uF 10 nF
600 uF 100 nF
6 mF 1 uF
60 mF 10 uF
22
Overvoltage
Accuracy
protection
± 4 % 250 VAC
+3 digits RMS
and place
®
Testboy Pocket 100