RBM MG1 Installation page 6

MAGNETIC SUPER-COMPACT SYSTEM FILTER
Patent application
no. 202015000064159
Code
3070.05.00
3070.05.50
Code
3174.05.00
3174.05.10
3174.05.30
3174.05.20
MG1 by RBM represents the best solution to solve plant problems
due to particle pollution, especially sand and rust that are formed due
to corrosion and scale during the normal operation of a system.
OPERATING PRINCIPLE: Through its effective and constant action,
the magnetic filter collects all the impurities present in the system,
preventing them from circulating within it, thus avoiding wear and
damage of the rest of the components making up the system,
circulators and heat exchangers in particular.
MG1 performs as continuous protective action on the boiler.
USE: It is advised to install MG1 on the return circuit, at the inlet of
the boiler, in order to protect it from any impurities in the system,
especially during the start-up phase.
Thanks to its compact dimensions, it can be installed under the boiler,
in systems for domestic use, where installation spaces are very
limited and there is no room for a traditional dirt separator.
MG1
PRODUCTION RANGE
Size
G 3/4"
G 3/4"
PRODUCTION RANGE - ACCESSORIES
Description
Straight rotary fitting,
for filter/boiler connection.
Curved rotary fitting,
for filter/boiler connection.
Flexible extendible fitting,
for filter connection.
Ball valve
with rotary connection.
DESCRIPTION
®
o
o
o
o
o
Connection on system side
M UNI-EN-ISO 228
(ball valve)
M UNI-EN-ISO 228
(ball valve)
Size
G 3/4"
G 3/4"
G 3/4"
G 3/4"
DEGREE OF FILTRATION: MG1 removes magnetic and non-
magnetic particles that may cause damages to the system during the
first day of operation.
The continuous passage of the fluid through the filter during the
normal operation of the system on which it is installed, gradually
removes any dirt.
WARNINGS: This filter contains powerful magnet, and strong
magnetic fields are present within it.
We recommend the holders of pacemaker devices to keep at a safe
distance during the filter operation and / or maintenance. Pay
attention to the use of electronic equipment in the vicinity of the
magnets, so as not to affect their operation.
CT3070.0_02
EN
March 2017
Super compact
Retains all impurities
Fights corrosion
Increases the lifespan of the
boiler
Maintains optimum system
efficiency
Connection on boiler side
F UNI-EN-ISO 228
(swivel connection)
F UNI-EN-ISO 228
(swivel connection)
Connection on boiler side
F UNI-EN-ISO 228
(swivel connection)
F UNI-EN-ISO 228
(swivel connection)
M UNI-EN-ISO 228
M UNI-EN-ISO 228