Richell 80002 Manuel D'instruction page 4

4. How to assemble the Door
Attach the Sliding Latches on both sides
4-1.
of Door Panel.
To attach on Door Panel, push Sliding Latch
in the direction of arrow until you hear a click
sound.
There is a front and back on the Door Panel.
※
Make sure the Sliding Lock faces front.
Attach Door Panel to Front Panel.
4-2.
Hook Sliding Lock (from Step 4-1) to the top
①
of horizontal Wire Slat on Front Panel.
Hook Sliding Lock to the bottom of
②
horizontal Wire Slat on Front Panel.
After Step , attach Sliding Latch to Wire
③ ②
Slat on Door Panel until you hear a click
sound using the same step as 4-1.
How to open/close Door
(A)Left-hand Door Installation
① Pull the Door Sliding Lock upward,
② Slide the Door sideways to open
②
①
How to open/close Side Door
Side Panel B
How to clean
< Frames and Wires >
●Wring a towel soaked in mild detergent and water, and gently wipe the product. After wiping, place the product in an airy and shady location to
avoid discoloration, deformation, rusting and molding.
●Do not use a scrub brush and/or polishing powder. It would cause discoloration, scratch or rusting.
●When using creosol or other disinfectants, make sure to dilute them as instructed to avoid discoloration and paint stripping.
●Do not use harsh chemicals such as thinner, benzene or alcohol. It would cause discoloration or paint stripping.
< Tray and Sliding latch >
●Wash with mild detergent. After drying, place the products in an airy and shady location to avoid discoloration.
Specifications
UPC/JAN
Pen
Dimensions Tray
Crate with Tray
Materials
Appropriate pet weight
lPlease note that product specifications and design may change
without prior notice for the purpose of quality improvement.
lThere may be coating cracks at some joints and each product may
experience different coloration of the wood grain as frames are
made of natural wood.
lIf you find something wrong with this product, please let us know.
Thank you!
Front Panel (The top of horizontal Wire Slat)
Front Panel
(The bottom of
horizontal Wire Slat)
Hook
Use Hook receiver to
keep the door open.
Slide the right and left Locks upward.
①
Open Side Door.
②
Hooking Locks at the top of wire keeps Side Door open.
③
Lock
Side Door for
exchanging training
tray/food & water bowls.
803840 80002-7 / 4973655 50402-4
803840 80007-2 / 4973655 50400-0
803840 94920-7 / 4973655 50401-7
35.4 - 60.6"W x 23.6"D x 23.6"H
37 - 62.2"W x 24.6"D x 1"H
37 - 62.2"W x 24.6"D x 24"H
Natural Wood, Steel, and Plastic
Small dogs 8.8 - 26.4 lbs.
4-2
Door Door
Sliding Lock Sliding Lock
Door Panel
②
4-2
Front Panel Front Panel
(B)Right-hand Door Installation
① Pull the Door Slide Lock downward,
② Slide the Door sideways to open
※
※Reverse the steps to disassemble this product.
803840 80003-4 / 4973655 50412-3
803840 80008-9 / 4973655 50410-9
803840 94921-4 / 4973655 50411-6
35.4 - 60.6"W x 31.1"D x 27.8"H
37 - 62.2"W x 32.1"D x 1"H
37 - 62.2"W x 32.1"D x 28"H
Small to medium dogs 8.8 - 44 lbs.
4
Sliding Latch Sliding Latch
Lock
4-1
③
4-2
Door Panel
②
Able to attach Side Panel B to fixed frame
as well depending on where Pen is placed.
Designed by:
Richell Corporation, Japan
Distributed by:
Richell USA, Inc.
Grand Prairie, Texas 75050
Phone (972) 641-9795 Fax (972) 641-8495
Visit us at www.richellusa.com
MADE IN VIETNAM
Hook
Sliding Latch Sliding Latch
Door Panel Door Panel
①