ICON inspire 5G2 Manuel De L'utilisateur page 37

Mackie Control mode function table (Nuendo/Cubase - PVC Overlay)
Controller
"Encoder 1 - 8
(Rotate)
Use with button Pan,
EQ, Inserts, Master,
FX Sen & VST"
"Encoder 1 - 8 (Enter)
Use with button Pan,
EQ, Inserts, Master,
FX Sen & VST"
Fader 1-8
Fader M
Button "(Explorer)"
1-8
Button "M" 1-8
Button "S" 1-8
Button "(dot)" 1-8
Button "Track <"
Button "Track >"
Button "Bank <"
Button "Bank >"
Button "(Loop)"
Button "<<"
Button ">>"
Button "(Stop)"
Button "(Play)"
Button "(Rec)"
Function
Adjust parameters of
channel 1-8 according to
selected function (Pan,
EQ, Inserts, Master, FX
Sen & VST)
Adjust parameters of
channel 1-8 according to
selected function (Pan,
EQ, Inserts, Master, FX
Sen & VST)
Channel 1-8 volume
Master channel volume
Select track 1-8
Mute track 1-8
Solo track 1-8
Record track 1-8
Shift one channel up
Shift one channel down
Shift eight channel up
Shift eight channel down
Activate the loop function
Activate the rewind
function
Activate the fast forward
function
Activate the stop function
Activate the play function
Activate the record
function
Controller
"Button ""Shift""
Use with F1-F8 buttons"
Button "F1-F8"
Button "Save"
Button "Undo"
Jog wheel (Rotate)
Joe wheel (Enter)
Button "Zoom L/R"
"Button ""Zoom Up/Down""
(Use with jog wheel)"
"Button ""Zoom In/Out""
(Use with jog wheel)"
"Button ""Zoom Track""
(Use with jog wheel)"
"Button ""Pan""
(Use with 1-8 encoders)"
"Button ""EQ""
(Use with 1-8 encoders)"
"Button ""Inserts""
(Use with 1-8 encoders)"
"Button ""Master""
(Use with 1-8 encoders)"
"Button ""FX Send""
(Use with 1-8 encoders)"
"Button ""VST""
(Use with 1-8 encoders)"
Button "Flip"
Button"Page Up"
Button "Page Down"
Function
F9-F16 self define
function
Self define function
Activate the save function
Activate the undo function
Scrolling the play-line
forward & backward
Add marker
Switch between clips
Scrolling and selecting
track vertically
Zoom in/out track
horizontally
Zoom in/out track
vertically
Please refer to "Encoder
1-8 (Rotate & Enter)"
Please refer to "Encoder
1-8 (Rotate & Enter)"
Please refer to "Encoder
1-8 (Rotate & Enter)"
Please refer to "Encoder
1-8 (Rotate & Enter)"
Please refer to "Encoder
1-8 (Rotate & Enter)"
Please refer to "Encoder
1-8 (Rotate & Enter)"
Swap the parameter
settings of the faders and
the rotary encoder knobs
Flip page backward
Flip page forward
37