Inateck SA01004 Manuel D'instructions page 4

Note
a. Please safely eject hard drive before disconnect the enclosure
from a computer.
b. It is normal if the enclosure feels hot after it works a long
time, as a working M.2 hard drive dissipates a lot of heat.
c. The enclosure will enter idle mode if there is no operation on
the hard drive over 5 minutes. It can reduce the heat of the
enclosure.
Support
For any inquiries or comments concerning our products, please
send an email to support@inateck.com, and we will respond to
you as soon as possible.