Complete The Installation - Wolf 1055759 Guide D'installation

IN S TA L L AT I O N

Complete the Installation

F I LT ER S
Install the grease cups at the bottom rear edge of the hood.
Orient the filters with lines running vertically. To install, place
the top edge of the filter against the spring, press upward
then rotate the bottom toward the back of the hood. Refer
to the illustration below.
LI GH T B UL BS
A suction-cup-style light bulb changer is provided with
the hood. To install, use the changer to push the bulb into
the receptacle and rotate counterclockwise one-quarter
turn. Refer to the illustration below.
GREASE
CUP
SPRING
FILTER
SIDE VIEW
Filters
LIGHT BULB
CHANGER
Light bulb installation
W OL F L OGO
To attach the Wolf logo, clean the mounting area with
rubbing alcohol. Remove the paper backing, position the
logo parallel with the bottom of the hood, and press into
place.
wolfappliance.com | 9