Hood Preparation - Wolf 1055759 Guide D'installation

IN S TA L L AT I O N

Hood Preparation

Remove the filters prior to installation. To remove, press
the filter upward and rotate the bottom. Remove the grease
cups from the bottom edge of the hood. Refer to the illustra-
tion below.
GREASE
CUP
SPRING
FILTER
SIDE VIEW
Filters
6 | Wolf Customer Care 800.222.7820
Installation
WARNING
Wall framing must be able to support the weight of the
hood and internal blower, if applicable.
Refer to the illustration below for typical wall framing.
1
Additional framing or blocking is required in the
mounting strip location.
18"
(457)
BLOCKING
TO BOTTOM
OF HOOD
Wall framing (typical)
MOUNTING
STRIP
C L