Care And Cleaning - Verilux HappyLight Liberty XKS Mode D'emploi

Lens/Bulb Removal and Replacement — continued
To Replace the Bulb:
1. Remove the lens by following the directions
described above.
2. Unscrew the two blue thumb screws that hold
the black bulb holder and the bulb itself (D).
3. Gently pull up the black bulb holder to expose
the base of the bulb (E).
4. Holding the bulb at its base, gently lift out the
old bulb, pulling it slowly and gently away from
the lamp body as you lift it upward (F).
5. Remove the black bulb holder by lifting it over
the top of the old bulb.
6. Place the black bulb holder over the top of the
new bulb.
7. Gently insert the new bulb into the receptacle
from which you removed the old bulb (G). A
"click" sound will indicate the bulb is properly
installed.
8. Lower the black bulb holder onto the bulb base.
Reinstall the two blue thumb screws.
9. Replace the lens as described above.
WARNING:
handling, cleanup, disposal and recycling in accordance with applicable laws
in Canada, please visit http://www.ec.gc.ca/mercure-mercury/ and
http://www.lightrecycle.ca
Your lamp is made from high-quality materials that will last for many years with
minimum care. You may want to periodically clean the lamp using a mild non-
abrasive cleaner and soft cloth. When cleaning, make sure you have turned off
and unplugged the unit and allowed sufficient time for it to cool.
WARNING:
lamp, make sure you have turned off and unplugged the lamp and allowed
sufficient time for the bulb to cool.
CAUTION:
cleaners containing abrasives or ammonia.
CAUTION:
lamp dry completely before restoring power.
This bulb contains a trace amount of mercury. For safe

Care and Cleaning

To prevent risk of shock or personal injury when cleaning
Clean only with a soft dry cloth – do not use solvents or
After cleaning the lamp, wipe away all moisture and let the
8
D
F
E
G