Changing The Lenses/Lens Replacement; Care And Cleaning - Verilux HappyLight Liberty Serie Mode D'emploi

Changing the Lenses/Lens Replacement

Your HappyLight Liberty Series Energy Lamp comes with interchangeable comfort and
high-energy lenses, inserted in a bezel and held with magnets to the lamp body, that
regulate the light intensity, reduce glare and provide your eyes with
even stimulation. You can choose – or change – the
covers to get the amount of light you want for your light
therapy program:
1. Remove the lens by inserting a coin or your finger
into the opening between the lens bezel and the
lamp body (A).
2. Gently pull the lens and bezel away from the lamp
body, lifting slowly as you pull (B).
3. Hold the bezel at the top and pull away the lens (C).
4. To install the other lens, work from the underside of
the bezel and lens. Align the six cutouts in the lens
(D) with the six magnet clips (E). Lower the lens,
and slide it back into position.
D
D
WARNING:
implantable defibrillator, insulin pump, any other type of electro-mechanical
device, or brain shunts that contain magnets, keep sufficient distance (about
6 inches) between the device and the lamp.
Your lenses will yellow over time and should be replaced annually. Contact Verilux
customer service at 1-800-786-6850 or order online at www.verilux.com.
Your lamp is made from high quality materials that will last for many years with
minimum care. You may want to periodically clean the lamp using a mild non-
abrasive cleaner and soft cloth. When cleaning, make sure you have turned off
and unplugged the unit and allowed sufficient time for the unit to cool.
WARNING:
lamp, make sure you have turned off and unplugged the lamp and allowed
sufficient time for the bulb to cool.
CAUTION :
cleaners containing abrasives or ammonia.
CAUTION :
lamp dry completely before restoring power.
3/4"
This product contains magnets. If you have a pacemaker,

Care and Cleaning

To prevent risk of shock or personal injury when cleaning
Clean only with a soft dry cloth – do not use solvents or
After cleaning the lamp, wipe away all moisture and let the
E
E
10
A
B
C
Lens
Bezel
Bezel
Lens