Cleaning The Glass Cooktop; Heavy, Burned-On Residue - GE Profile PEP7030 Manuel Du Propriétaire

Cleaning the Glass Cooktop

To maintain and protect the surface of your glass cooktop,
follow these steps:
with a ceramic cooktop cleaner. This helps protect the
top and makes cleanup easier.
2. Regular use of a ceramic cooktop cleaner will help
keep the cooktop looking new.
3. Shake the cleaning cream well. Apply a few drops of
a ceramic cooktop cleaner directly to the cooktop.
ceramic cooktops to clean the entire cooktop surface.
Burned-On Residue
NOTE:
use scrub pads other than those recommended.
1. Allow the cooktop to cool.
2. Spread a few drops of a ceramic cooktop cleaner on
the entire burned residue area.
cooktops, rub the residue area, applying pressure as
needed.
4. If any residue remains, repeat the steps listed above
as needed.

Heavy, Burned-On Residue

1. Allow the cooktop to cool.
a 45° angle against the glass surface and scrape the
soil. It will be necessary to apply pressure to the razor
scraper in order to remove the residue.
3. After scraping with the razor scraper, spread a few
drops of a ceramic cooktop cleaner on the entire burned
any remaining residue.
4. For additional protection, after all residue has been
removed, polish the entire surface with a ceramic
cooktop cleaner and a paper towel.
49-2001133 Rev. 1
NOTE:
cooktop until it has been cleaned thoroughly.
Ceramic
Cooktop
Cleaner
Clean your cooktop after each
cleaner.
5. For additional protection, after all residue has been
removed, polish the entire surface with a ceramic
cooktop cleaner and a paper towel.
ceramic cooktops.
The ceramic cooktop scraper and all recommended supplies
NOTE:
For cleaning videos and
instructions, scan the QR code
with your device.
15