Whirlpool YWHD560CHW Guide D'utilisation Et D'entretien page 15

15.
Remove garments promptly
after cycle is finished
After a wash-only cycle, promptly remove
garments after cycle has completed to avoid
odor and rusting of metal objects on garments.
When unloading garments, pull back the door seal and check for
small items between the tub and the washer/dryer drum.
If you will be unable to remove the load promptly after a wash-
only cycle, use the FanFresh
After a wash and dry cycle or a dry-only cycle, promptly
remove garments after cycle has completed to reduce wrinkling.
If you will be unable to remove a load promptly, use the Wrinkle
Shield option (see Step 11).
™
NOTES:
■ This washer/dryer has a tight seal to avoid water leaks.
To avoid odors, leave the door open to allow the washer/
dryer to dry between uses.
■ If a dry cycle is interrupted and the load removed before
the cool-down period at the end of the cycle, the load will
be very hot.
option (see Step 11).
®
Setting a delayed start
4:28
What to Wash
REGULAR
Temperature Spin Speed
WARM EXTRA FAST
Touch POWER until the indicators turn on. From the home
screen, make sure the washer/dryer is set to the correct time
and date (if it is not, see Step 12 for instructions on how to set
the time and date).
Touch the clock icon on the far right portion of the touch
screen. The "Select a start time" screen will show on the
display. Scroll horizontally to select a preferred start time for
your wash or dry cycle. The times will display in 15-minute
increments up to 8 hours. Touch OKAY to set the start time.
The display will return to the home screen and the clock icon
will turn brown.
To delete or modify the delayed start, touch the clock icon
again and follow the screen prompts.
3:15
How to Wash
NORMAL
Auto Dry
Dry
15