Johnson Health Tech Vision U60 Upright Bike Manuel Du Propriétaire page 18

MAINTENANCE
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our bikes so lubrication is not needed. The most important maintenance step is to
simply wipe your perspiration off the bike after each use.
HOW DO I CLEAN MY BIKE?
Clean with soap and water cleaners only. Never use solvents on plastic parts. Cleanliness of your bike and its operating
environment will keep maintenance problems and service calls to a minimum. For this reason, we recommend that the
following preventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
• Turn off the bike by unplugging the power cord from the wall outlet
• Wipe down the bike with a damp cloth. Never use solvents, as they
can cause damage to the bike.
• Inspect the power cord. If the power cord is damaged, reference
contact information on the back cover of the OWNER'S MANUAL
for a replacement.
• Make sure the power cord is not underneath the bike or in any other area where it can become pinched or cut.
EVERY WEEK
Clean underneath the bike, following these steps:
• Turn off the bike.
• Move the bike to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the bike.
• Return the bike to its previous position.
EVERY MONTH
• Inspect all assembly bolts and pedals on the machine for proper tightness.
• Clean any debris off of the seat guide rail.
18
WARNING
To remove power from the exercise bike,
the power cord must be disconnected
from the wall outlet.