Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
2b. Mounting the wall plate into concrete
* When installing wall mounts on cinder block, verify the actual concrete thickness is at least 1-3/8" (35mm) for
using the concrete anchors. Do not drill into mortar joints! Be sure to mount in a solid part of the block,
generally 1" (25mm) minimum from the side of the block. It is suggested to use an electric drill on slow setting to
drill the hole instead of a hammer drill to avoid breaking out the back of the hole when entering a void or cavity.
* It is recommended to use a drill driver to tighten bolts. Tighten bolts so that the wall plate is firmly attached to
the wall, but DO NOT over-tighten. The bolts can be damaged by over-tightening which will strip their
threading.
4
EM-T1000..LU.092013.IM
Publicité
