DK2 AC20G Manuel De L'utilisateur page 10

13. Do not smoke when spraying paint, insecticides, or other flammable
substances.
14. Use a face mask/respirator when spraying and spray in a well ventilated
area to prevent health and fire hazards.
15. Do not direct paint or other sprayed material at the compressor.
Locate compressor as far away from the spraying area as possible to
minimize over-spray accumulation on the compressor
16. When spraying or cleaning with solvents or toxic chemicals, follow the
instructions provided by the chemical manufacturer.


WARNING! RISK OF MOVING PARTS: If the air compressor is in operation,
all guards and covers should be attached or installed correctly. If any
guard or cover has been damaged, do not operate the equipment until
the proper personnel have correctly repaired the equipment. The power
cord should be free of any moving parts, twisting and/or crimping while in
use and while in storage.


WARNING! RISK OF FALLING: Operation of the air compressor should
always be in a position that is stable. Never use the air compressor on a
rooftop or elevated position that could allow the unit to fall or be tipped
over. Use additional air hose for elevated jobs.


DANGER! RISK OF ELECTRICAL SHOCK: Never utilize the air compressor
in the rain or wet conditions. Any electrical issues or repairs should be
performed by authorized personnel such as an electrician and should
comply with all national and local electrical codes. The air compressor
should also have the proper three prong grounding plug, correct voltage,
and adequate fuse protection.
10 | AC20G(H) man.