Black 5/8" Large Head Screw - Sauder 421191 Instructions De Montage

Step 18
Fasten two RETAINING BARS (155M) to the DOOR (O). Tighten
å
the RETAINING BARS to the DOOR using four BLACK 5/8"
LARGE HEAD SCREWS (140S).
NOTE: Be sure to position the RETAINING BARS exactly as shown.
å
NOTE: The RETAINING BARS should move up and down easily.
å
Fasten the PULL (149K) to the DOOR (O). Use two SILVER 5/8"
å
MACHINE SCREWS (15S).
The RETAINING BARS should
move up and down easily.
155M
SILVER 5/8" MACHINE SCREW
(2 used for the PULL)
www.sauder.com/service

BLACK 5/8" LARGE HEAD SCREW

(4 used in this step)
The RETAINING
BARS should
overhang the
bottom edge of
the DOOR.
15S
140S
O
149K
421191
Page 23