cecotec ExtremeTitanium 19000 Manuel D'instructions page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
ENGLISH
please remove them before putting them into the feeding tube of the appliance.
• Make sure that the blade has stopped rotating and that the product is unplugged before
assembling or disassembling any part of the appliance.
• If the product stops working, it may be caused by the temperature control protection of the motor.
Please, turn off the power and let it cool down for 20-30 minutes before resuming operation.
• Unplug the appliance immediately if fire or smoke is observed.
• Do not leave the appliance unattended while in use. Unplug it from the mains supply when you
finish using it or when you leave the room.
• Do not try to repair the appliance by yourself. Contac the official Technical Support Service of
Cecotec for advice.
• Cleaning and maintenance must be carried out according to this instruction manual to make sure
the appliance functions properly. Turn off and unplug the appliance before moving and cleaning it.
• Cleaning and maintenance tasks must not be carried out by children.
• Do not wash the appliance in dishwashers.
• Store the appliance and its instruction manual in a safe and dry place when not in use.
• No liability is accepted for any eventual damage or personal injuries derived from misuse or
non-compliance with this instruction manual.
3. BEFORE USE
• Remove all packaging elements.
• Inspect all parts of the appliance for visual damage. Unwind the power cord completely and
inspect it for damage. Do not use the appliance if it or its cord have been damaged or are not
working properly. In case of damage, contact the official Technical Support Service of Cecotec
for advise, repairs, or returns.
• Make sure you have read and understood all instructions and warnings in this instruction
manual. Pay particular attention to the safety instructions on previous pages.
• Wash all parts that are going to be in contact with foodstuffs.
ASSEMBLY
This product is equipped with a double safety system that will prevent its operation, unless all
parts are correctly installed.
Follow the instructions below to assemble the appliance:
1-1
1-2
12
EXTREMETITANIUM 19000
• Align the
symbol on the juice nozzle
with the
symbol on the central ring of the
appliance and push it until it locks into place.
If the nozzle does not fit, please make sure
that the bump in the interior of the nozzle
slides into the groove of the outlet. Once
locked, the nozzle will be on the drip-proof
position.
• Rotate the nozzle 180º clockwise until the
symbol is aligned with the
2-1
The nozzle will now be in the normal juice
position.
2-2
• Put the central ring onto the main body of
the appliance. Make sure the juice nozzle is
oriented to the front of the appliance.
• Put the sieve onto the motor wheel and
push it until it locks into place.
• Place the cover onto the central ring of the
appliance.
• Clip the clasps to the outer rim of the upper
cover and push them down, in order to lock
the cover to the main body of the appliance.
ENGLISH
symbol.
EXTREMETITANIUM 19000
13

Publicité

Table des Matières
loading

Table des Matières