Converting The Vacuum Unit - ITC HD7515 Manuel D'instructions

Use without bag
Your central vacuum unit was designed for
use with or without disposable bag. Though
it is sold with a bag installed, it can easily be
removed, and the unit modified for use without
disposable bags.
1. To access the bag, unlatch the two clips
and remove the dust receptacle (figure 17).
2. Remove the used bag (figure 18). If it
has been used, seal its opening with the
self-adhesive flap on the bag collar (see
instructions on the bag). Discard the used
bag. If the bag was not utilized, you may
wish to store it for later use.
3. Remove the two screws from the adaptor.
(figure 19).
4. While grasping both the bag adaptor and
the fitting, turn and remove the bag adaptor
(figure 20). Store these parts for future
use, if so desired.
5. The vacuum unit is now ready for use
without bags.
Note: this procedure is reversible at any time.
Converting the unit
Maintenance
figure 17
figure 18
figure 19
figure 20
21